dishwasherfit

Kitchen appliances / Refrigerators / Measuring

Bring this to your installer

Measure the space.
Check the conditions.

Look beyond capacity. Check the alcove, ventilation space, door swing and the route into your kitchen.

  1. Record the narrowest alcove width, finished-floor height and depth to the cabinet face.
  2. Record wall and island positions, door swing, drawer access and handle projection.
  3. Measure every doorway, hall and turn on the delivery route.
  4. Compare the exact model’s ventilation and water/electrical requirements.

Your measurement notes

Appliance model: ____________________   Configuration: ____________________

Opening width: __________   Height: __________   Depth: __________

Units: __________   Utility locations: _________________________________

Surrounding clearances / delivery route: __________________________________

Installer’s unresolved checks: __________________________________________

Use the instructions for the exact model.

Take measurements from the reference points shown in the manufacturer’s drawing. A body measurement is not an opening requirement. Do not use one model’s diagram to establish another model’s fit.

GE GNE27JYMFS · Freestanding French door / bottom freezer

Read this model’s dimensional evidence

GE GTS22KYNRFS · Freestanding top freezer

Read this model’s dimensional evidence

GE GWE19JYLFS · Freestanding counter-depth French door / bottom freezer

Read this model’s dimensional evidence

Back to refrigerators →