GE · Freestanding French door / bottom freezer
GE GNE27JYMFS dimensions
27.0 cu. ft. French-door refrigerator
Manufacturer documentation reviewed 2026-09-21; individual fact dates are retained below. This is a research record, not a hands-on review.
Manufacturer product information ↗
We may earn a commission from qualifying purchases through these affiliate links, at no extra cost to you.
Confirm the exact product, current stock, delivery and installation with the seller.
Some source details remain unresolved. Review the notes and confirm them with the manufacturer before ordering.
Opening requirements and body dimensions
Use the opening requirements for the installation shown. The appliance-body dimensions are provided separately for reference. “Not verified” means the requirement has not been established in this record.
| Measurement | Documented value |
|---|---|
| Minimum opening width | 36 in |
| Maximum opening width | Not verified |
| Minimum opening height | Not verified |
| Maximum opening height | Not verified |
| Minimum opening depth | Not verified |
| Maximum opening depth | Not verified |
| Appliance body width | 35.75 in |
| Appliance body height | 69.875 in |
| Appliance body depth | 35.875 in |
Overall appliance dimensions; depth includes handle. These are not cabinet opening dimensions.
Where manufacturer sources differ
These differences remain part of the research record. Confirm the exact unit and installation document before ordering.
Body · depth
- 35.875 in — Exact-model product specification. Read source ↗
- 36.3125 in — 26/27 cu. ft. French-door family table, dimension C including handle. Read source ↗
- 35.875 in — Model-specific Quick Specs drawing, revised December 2024, page 1. Read source ↗
Reviewed September 21: retain the model-specific product and Quick Specs depth for reference. The newer shared family manual still differs; GE has not confirmed which applies to the shipped revision. Opening height/depth remain unverified and no automatic fit approval is given.
Compare your opening with the documented dimensions
This checks only the opening measurements recorded below. Conditional cutouts, trim, ventilation, utilities, support and delivery access still need a separate review.
Installation details to review
- Measure the narrowest opening at multiple heights, including baseboards, trim and countertop overhang.
- Allow the separately documented side, top and rear clearances; check the exact unit's rating label and installation revision.
- Check adjacent walls, handle sweep, freezer access and the delivery path before ordering.
- The listed 90-degree door envelope does not establish full drawer/bin removal clearance.
- The model-linked family manual and exact-model product table disagree on overall depth. Confirm the exact shipped revision with GE or an installer.
- The December 2024 model-specific drawing corroborates the displayed overall depth; the April 2026 family manual still disagrees. Confirm the shipped revision before relying on rear clearance or door swing.
Manufacturer support and product listing were accessible on the observation date. Support lists production through Present, while storefront extraction includes inconsistent stock/discontinued banners. Current production, retailer stock, price and delivery are unverified.
Confirm the full model suffix and the revision of the installation instructions. Dimensional checks do not establish utility compatibility, structural support, safe clearances or installation approval.
The evidence behind this record
- GE GNE27JYMFS product specifications ↗ manufacturer-product-specification
- GE GNE27JYMFS installation support and document association ↗ manufacturer-support
- GE bottom-freezer installation manual 49-1000472 Rev.9 (April 2026) ↗ installation-manual
- GE GNE27JYMFS Quick Specs, revised December 2024 ↗ manufacturer-dimension-sheet
View individual facts and their sources
| Fact | Recorded information | Source |
|---|---|---|
| Body · width | 35.75 in Manufacturer's overall width. Observed 2026-09-20 | Manufacturer evidence ↗ |
| Body · height | 69.875 in Manufacturer's overall height; not under-counter clearance. Observed 2026-09-20 | Manufacturer evidence ↗ |
| Body · depth | 35.875 in Manufacturer's overall depth, including handle. Observed 2026-09-20 | Manufacturer evidence ↗ |
| Electrical · product Voltage | 120 V Product specifications list 120 V; installation manual uses 115 V nominal supply wording. Observed 2026-09-20 | Manufacturer evidence ↗ |
| Electrical · frequency | 60 Hz Published product rating. Observed 2026-09-20 | Manufacturer evidence ↗ |
| Electrical · product Amperage | 15 A Product rating; installer must use the applicable installation instructions and rating plate. Observed 2026-09-20 | Manufacturer evidence ↗ |
| Clearances · side Each | 0.125 in Air clearance on each side; does not establish door-opening clearance. Observed 2026-09-20 | Manufacturer evidence ↗ |
| Clearances · top | 1 in Top airflow clearance; manual references cabinet/hinge-cover position. Observed 2026-09-20 | Manufacturer evidence ↗ |
| Clearances · back | 2 in Space for airflow and service connections. Observed 2026-09-20 | Manufacturer evidence ↗ |
| Door Swing · depth At90 | 43.75 in Manufacturer product-table depth with door opened to 90 degrees; not closed depth. Observed 2026-09-20 | Manufacturer evidence ↗ |
| Door Swing · width At90Including Handle | 43.75 in Manufacturer product-table width with door opened to 90 degrees including handle. Observed 2026-09-20 | Manufacturer evidence ↗ |
| Case Depth Without Door | 29 in Bare case depth; do not present as installed overall depth. Observed 2026-09-20 | Manufacturer evidence ↗ |
| Depth Without Handle | 33.375 in Includes doors, excludes handle. Observed 2026-09-20 | Manufacturer evidence ↗ |
| Opening · min Width | 36 in Page 25 cabinet-opening paragraph and 26/27 cu. ft. French-door B column. Width is initial planning only; add obstructing overhang/baseboard and verify clearances. Observed 2026-09-20 | Manufacturer evidence ↗ |
| Electrical · installation Supply Voltage | 115 V Manual specifies grounded individual outlet; nominal wording differs from product rating. Observed 2026-09-20 | Manufacturer evidence ↗ |
| Electrical · installation Circuit Options | [15,20] A Manual fused grounded supply options; verify rating plate and local requirements. Observed 2026-09-20 | Manufacturer evidence ↗ |
| Body · depth | 35.875 in Exact-model product table; family manual differs. Observed 2026-09-20 | Manufacturer evidence ↗ |
| Body · depth | 35.875 in Model-specific drawing independently supports the displayed handle-inclusive depth. Family manual discrepancy remains unresolved. Observed 2026-09-21 | Manufacturer evidence ↗ |
Manufacturer links are ordinary links. Any affiliate links are labeled; commissions never determine model order, measurements or compatibility. Prices, stock, delivery and installation services must be confirmed with the seller.