dishwasherfit

Kitchen appliances / Ranges / Measuring

Bring this to your installer

Measure the space.
Check the conditions.

Match the cooking setup to your space. Opening width, fuel, power and surrounding clearances all matter.

  1. Measure the opening between cabinets and the finished countertop height.
  2. Identify freestanding versus slide-in installation and the surrounding cabinet layout.
  3. Have the installer confirm gas, electric or induction supply requirements and connection locations.
  4. Check the installation drawing for overhead and side clearances, support and anti-tip hardware.

Your measurement notes

Appliance model: ____________________   Configuration: ____________________

Opening width: __________   Height: __________   Depth: __________

Units: __________   Utility locations: _________________________________

Surrounding clearances / delivery route: __________________________________

Installer’s unresolved checks: __________________________________________

Use the instructions for the exact model.

Take measurements from the reference points shown in the manufacturer’s drawing. A body measurement is not an opening requirement. Do not use one model’s diagram to establish another model’s fit.

GE GGF600AVSS · Freestanding natural gas / rear controls

Read this model’s dimensional evidence

GE GRF600AVSS · Freestanding electric / rear controls

Read this model’s dimensional evidence

GE GRS600AVFS · Slide-in electric / front controls

Read this model’s dimensional evidence

Back to ranges →