Elkay · Drop-in / top-mount; single bowl
Elkay LSS25224 dimensions
25-inch single-bowl drop-in stainless steel sink
Manufacturer documentation reviewed 2026-09-23; individual fact dates are retained below. This is a research record, not a hands-on review.
Manufacturer product information ↗Some source details remain unresolved. Review the notes and confirm them with the manufacturer before ordering.
Opening requirements and body dimensions
Use the opening requirements for the installation shown. The appliance-body dimensions are provided separately for reference. “Not verified” means the requirement has not been established in this record.
| Measurement | Documented value |
|---|---|
| Minimum opening width | 24.375 in |
| Maximum opening width | Not verified |
| Minimum opening height | Not verified |
| Maximum opening height | Not verified |
| Minimum opening depth | 21.375 in |
| Maximum opening depth | Not verified |
| Appliance body width | 25 in |
| Appliance body height | 9.125 in |
| Appliance body depth | 22 in |
Cutout dimensions are the countertop opening for a drop-in / top-mount installation. Sink outer dimensions are recorded separately where published and are NOT an opening requirement. Undermount installations use a different cutout and are not covered by these records.
Compare your opening with the documented dimensions
This checks only the opening measurements recorded below. Conditional cutouts, trim, ventilation, utilities, support and delivery access still need a separate review.
Installation details to review
- The published cutout is a template dimension, not a minimum. A hole cut larger than the published cutout may leave the sink rim unable to cover it.
- No manufacturer in these records publishes a MAXIMUM cutout, so no maximum is recorded. When fitting a sink into an existing countertop hole, the installer must confirm rim coverage against the actual hole.
- Corner radius is part of the cutout specification and differs between models. A square-cornered hole will not accept a radiused template.
- Use the manufacturer's own cutout template for the exact model. Do not scale a drawing or reuse another model's template.
- The minimum cabinet or base cabinet width is a separate requirement from the countertop cutout; both must be satisfied.
- Minimum Cabinet Size is published as 30 inches.
- Cutout template number 1000001188. The specification sheet records that a template is not included.
Availability and finish options were not verified.
Confirm the full model suffix and the revision of the installation instructions. Dimensional checks do not establish utility compatibility, structural support, safe clearances or installation approval.
The evidence behind this record
- Elkay LSS25224 specification sheet ↗ manufacturer-product-specification
View individual facts and their sources
| Fact | Recorded information | Source |
|---|---|---|
| Opening · min Width | 24.375 in Cutout Dimensions for Drop-in Installation: 24-3/8" x 21-3/8" (619mm x 543mm) with 1-1/2" (38mm) corner radius. Observed 2026-09-23 | Manufacturer evidence ↗ |
| Opening · min Depth | 21.375 in Cutout front-to-back dimension from the same published cutout figure. Observed 2026-09-23 | Manufacturer evidence ↗ |
| Body · width | 25 in Sink Dimensions: 25" x 22" x 9-1/8". Sink outer size, NOT the countertop cutout. Observed 2026-09-23 | Manufacturer evidence ↗ |
| Body · depth | 22 in Sink outer front-to-back dimension, not an opening requirement. Observed 2026-09-23 | Manufacturer evidence ↗ |
| Body · height | 9.125 in Published bowl depth from the Sink Dimensions figure. Observed 2026-09-23 | Manufacturer evidence ↗ |
Manufacturer links are ordinary links. Any affiliate links are labeled; commissions never determine model order, measurements or compatibility. Prices, stock, delivery and installation services must be confirmed with the seller.