- Body width
- 25 in
- Body height
- 9.125 in
- Body depth
- 22 in
Body dimensions describe the appliance, not the space required to install it.
Some specifications need further review. Open the evidence before planning a purchase.
2 documented models · selected research
Kitchen sink dimensions
& opening checks.
A drop-in sink needs a hole smaller than the sink. The published cutout has a specified corner radius and is not the nominal size.
What to measure →Start with your installation.
- If you are replacing a sink, measure the existing countertop hole at its widest points, front to back and side to side.
- Measure the corner radius of the existing hole. A radiused cutout and a square cutout are not interchangeable.
- Measure the base cabinet width; the cutout and the cabinet are separate requirements.
- Record the countertop thickness - mounting hardware can be limited by it.
- Confirm whether you need a top-mount or an undermount sink. The cutout differs, and these records cover top-mount only.
- Obtain the manufacturer's cutout template for the exact model before any cutting.
Compare your opening with the documented dimensions
This checks only the opening measurements recorded below. Conditional cutouts, trim, ventilation, utilities, support and delivery access still need a separate review.
Browse the documented models
Compare the details that matter.
2 documented models.
Kohler · Top-mount / drop-in; single bowl
K-3348-3
Single-bowl top-mount kitchen sink, three deck holes
- Body width
- Not verified
- Body height
- Not verified
- Body depth
- Not verified
Body dimensions describe the appliance, not the space required to install it.
Some specifications need further review. Open the evidence before planning a purchase.
Your side-by-side comparison
Choose up to three models above.
Selected models appear here. Open their detail pages to review the complete source evidence.
Installation accessories · Parts by exact model · Maintenance & care
Manufacturer links are ordinary links. Any affiliate links are labeled; commissions never determine model order, measurements or compatibility. Prices, stock, delivery and installation services must be confirmed with the seller.