Thermador · Built-in full-height refrigeration column; panel-ready
Thermador T24IR905SP dimensions
24-inch Freedom fresh-food column
Manufacturer documentation reviewed 2026-09-23; individual fact dates are retained below. This is a research record, not a hands-on review.
Manufacturer product information ↗Some source details remain unresolved. Review the notes and confirm them with the manufacturer before ordering.
Opening requirements and body dimensions
Use the opening requirements for the installation shown. The appliance-body dimensions are provided separately for reference. “Not verified” means the requirement has not been established in this record.
| Measurement | Documented value |
|---|---|
| Minimum opening width | 24 in |
| Maximum opening width | Not verified |
| Minimum opening height | 84 in |
| Maximum opening height | Not verified |
| Minimum opening depth | 25 in |
| Maximum opening depth | Not verified |
| Appliance body width | Not verified |
| Appliance body height | Not verified |
| Appliance body depth | 24 in |
Required Cutout Size from the manufacturer's design guide. The appliance's own height and width are NOT recorded: the source PDF's text layer doubles fraction digits (it renders 3/4 as 33/44), so those values are left unknown rather than decoded. The cutout figures are whole inches and are unaffected.
Compare your opening with the documented dimensions
This checks only the opening measurements recorded below. Conditional cutouts, trim, ventilation, utilities, support and delivery access still need a separate review.
Installation details to review
- The recorded figure is the required cutout for a single column. Joining two columns changes the opening and is not additive - confirm the manufacturer's dual-opening figure and the required dual installation kit.
- Column openings are full-height millwork. Confirm the finished opening height, the panel and handle selection, and the door swing clearance before any cutting.
- The 25-inch cutout depth exceeds a standard 24-inch cabinet run. Verify the finished depth at the top and bottom of the opening.
- Height is described as adjustable in the source. The adjustment range was not recorded because of the source text-layer defect; confirm it in the installation instructions for the exact model.
Availability, panel and handle selection and installation eligibility were not verified. Confirm with the manufacturer or an authorized dealer.
Confirm the full model suffix and the revision of the installation instructions. Dimensional checks do not establish utility compatibility, structural support, safe clearances or installation approval.
The evidence behind this record
- Thermador Design Guide Vol. 9 (August 2024), Freedom Refrigeration columns ↗ manufacturer-design-guide
View individual facts and their sources
| Fact | Recorded information | Source |
|---|---|---|
| Opening · min Width | 24 in Required Cutout Size (H x W x D) (in.): 84" x 24" x 25". Cabinet opening, not the appliance. Observed 2026-09-23 | Manufacturer evidence ↗ |
| Opening · min Height | 84 in Required Cutout Size height. Full-height column opening. Observed 2026-09-23 | Manufacturer evidence ↗ |
| Opening · min Depth | 25 in Required Cutout Size depth. Deeper than a standard 24-inch cabinet run. Observed 2026-09-23 | Manufacturer evidence ↗ |
| Body · depth | 24 in Appliance Dimensions depth, published separately from the cutout. Height and width omitted because the source text layer doubles fraction digits. Observed 2026-09-23 | Manufacturer evidence ↗ |
Manufacturer links are ordinary links. Any affiliate links are labeled; commissions never determine model order, measurements or compatibility. Prices, stock, delivery and installation services must be confirmed with the seller.