GE GDT226SSLSS cabinet opening requirements

Questions people ask about the GDT226SSLSS

The answers come only from the manufacturer documents linked on this page and the lookup's three outcomes.

What cabinet opening does the GE GDT226SSLSS need?

The reviewed manufacturer document lists a minimum cabinet opening of 32 3/8 in high, 24 in wide and 24 in deep for the GE GDT226SSLSS, with a maximum opening height of 34 3/4 in. Each figure links to its source in the table on this page. Its sources were reviewed on 2026-09-14.

Is the GDT226SSLSS a standard 24-inch dishwasher?

GE places the GDT226SSLSS in the 24-inch category. That label describes the cabinet class, not the cutout: the reviewed minimum opening width is 24 in, and the appliance body is 23 3/4 in wide. Use the opening requirement, never the label, when you compare it with your cabinet.

Will the GDT226SSLSS fit my opening?

Only your measurements can answer that. Enter the opening's height, width and depth in the lookup; the GDT226SSLSS comes back as a dimensional candidate, an installer-review item or outside the published requirements. None of the three outcomes is a fit guarantee: mounting, utilities, floor level, trim, panel weight and door swing stay with the installer.

How tall is the GDT226SSLSS, and is that the opening height?

The manufacturer lists the GDT226SSLSS appliance body at 32 1/4 in high. The body height is not the opening requirement: the minimum opening height on record is 32 3/8 in and the maximum is 34 3/4 in. Measure from the finished floor to the counter underside at several points and use the smallest reading.

Why is the GDT226SSLSS held for installer review?

It carries installation notes from the review. Keep plumbing and electrical services inside the shaded area in the installation drawing; the remaining rear wall must be clear. Compare the finished floor inside the opening with the room floor before planning removal or replacement. The quick-spec side drawing shows 23-inch door projection; the installation guide requires 23 1/8-inch front clearance. We use the larger installation requirement. The gate stays visible on this page until the evidence resolves.