← All opening-requirement comparisons
Opening-requirement comparison · sources reviewed 2026-09-14
Bosch SGE53C55UC vs GE GDT226SSLSS: which low counter does each fit?
If your counter is low, the decision between these two 24-inch-category models usually comes down to the height screen. The reviewed Bosch documents put the SGE53C55UC's minimum opening height at 32 1/8 in, while GE's installation guide puts the GDT226SSLSS at 32 3/8 in — a quarter-inch difference that can decide a 32 1/4-inch opening. GE also publishes an explicit maximum opening height of 34 3/4 in; the Bosch maximum is not verified in the reviewed documents.
| Requirement | Bosch SGE53C55UC | GE GDT226SSLSS |
|---|---|---|
| Minimum opening height | 32 1/8 in | 32 3/8 in |
| Maximum opening height | Not verified | 34 3/4 in |
| Minimum opening width | 24 in | 24 in |
| Maximum opening width | 24 1/4 in | Not verified |
| Minimum opening depth | 24 in | 24 in |
| Front clearance | Not verified | 23 1/8 in |
| Corner clearance | 6 in | 2 in |
What is equal
Both records screen at a 24-inch minimum opening width and a 24-inch minimum opening depth from their published tables. Equal published requirements are equal; we do not restate them as differences.
Unresolved limits and unknowns
The Bosch maximum opening height and front clearance are not verified: the 34 7/16-inch figure in the Bosch drawing labels the adjustable appliance body, not the cavity. GE's quick-spec side drawing shows a 23-inch door projection while the installation guide requires 23 1/8 inches of front clearance; the larger requirement is retained. The Bosch spec sheet and installation guide also disagree on minimum cavity dimensions — the stricter reviewed screen above governs, and the smaller drawing values remain installer review only.
Documented smaller or conditional configurations
These published alternatives never become automatic matches; each needs installer review of the applicable document.
- SGE53C55UC: about 32 1/16 × 23 5/8 × 21 5/8 in (H × W × D) — A linked installation drawing describes smaller minima. Document differences and trim/projection must be checked by the installer; this is not an automatic match. Source
Body dimensions are context, not requirements
| Body | SGE53C55UC | GDT226SSLSS |
|---|---|---|
| Height | 32 1/16 in | 32 1/4 in |
| Width | 23 9/16 in | 23 3/4 in |
| Depth | 22 9/16 in | 23 1/2 in |
Feature context from manufacturer specifications
SGE53C55UC features
- Sound rating
- 46 dBA
- Place settings
- 13
- Racks
- Not verified
- Drying system
- PureDry®
- Annual energy
- 240 kWh/year
- Connectivity
- Yes
Manufacturer specifications, checked September 20, 2026. Annual energy is a published estimate; sound ratings and drying names are not our test results.
GDT226SSLSS features
- Sound rating
- 51 dBA
- Place settings
- 12
- Racks
- Not verified
- Drying system
- Condensate Dry
- Annual energy
- 240 kWh/year
- Connectivity
- Optional (Requires part no. PBX23W00Y1)
Manufacturer specifications, checked September 20, 2026. Annual energy is a published estimate; sound ratings and drying names are not our test results.
Tradeoffs to check
- Wi-Fi requires a separately specified module; confirm availability before buying.
- Its 51 dBA published rating is higher than several options in this catalog.
This is a document-based comparison of published opening requirements, not a physical installation test, a performance ranking or a fit guarantee. Results from our lookup are dimensional candidates; installation conditions always remain to verify.
Check your own opening dimensions →
Exact-model retailer links
Resolve the opening questions above before ordering. Confirm stock, delivery, installation service and final cost with the retailer. Links marked affiliate may earn us a commission. Commissions never change the measurements, exclusions or ordering.
Both models appear in the low-counter guide. Corrections or a newer manufacturer drawing? Send us the model and source. Read our evidence policy.