GE Profile PDT755SYVFS cabinet opening requirements

Questions people ask about the PDT755SYVFS

The answers come only from the manufacturer documents linked on this page and the lookup's three outcomes.

What cabinet opening does the GE Profile PDT755SYVFS need?

The reviewed manufacturer document lists a minimum cabinet opening of 33 1/2 in high, 24 in wide and 24 in deep for the GE Profile PDT755SYVFS. Each figure links to its source in the table on this page. Treat any match as a dimensional candidate for an installer to confirm.

Is the PDT755SYVFS a standard 24-inch dishwasher?

GE Profile places the PDT755SYVFS in the 24-inch category. That label describes the cabinet class, not the cutout: the reviewed minimum opening width is 24 in, and the appliance body is 23 3/4 in wide. Use the opening requirement, never the label, when you compare it with your cabinet.

Will the PDT755SYVFS fit my opening?

Only your measurements can answer that. Enter the opening's height, width and depth in the lookup; the PDT755SYVFS comes back as a dimensional candidate, an installer-review item or outside the published requirements. None of the three outcomes is a fit guarantee: mounting, utilities, floor level, trim, panel weight and door swing stay with the installer.

How tall is the PDT755SYVFS, and is that the opening height?

The manufacturer lists the PDT755SYVFS appliance body at 34 in high. The body height is not the opening requirement: the minimum opening height on record is 33 1/2 in. Measure from the finished floor to the counter underside at several points and use the smallest reading.