Frigidaire FFBD1831US cabinet opening requirements

Questions people ask about the FFBD1831US

The answers come only from the manufacturer documents linked on this page and the lookup's three outcomes.

What cabinet opening does the Frigidaire FFBD1831US need?

The reviewed manufacturer document lists a minimum cabinet opening of 32 1/2 in high, 17.7 in wide and 24 in deep for the Frigidaire FFBD1831US, with a maximum opening height of 35 1/4 in. Each figure links to its source in the table on this page. This record is held for installer review, so the lookup never returns it as an automatic candidate.

Is the FFBD1831US a standard 18-inch dishwasher?

Frigidaire places the FFBD1831US in the 18-inch category. That label describes the cabinet class, not the cutout: the reviewed minimum opening width is 17.7 in, and the appliance body is 18 in wide. Use the opening requirement, never the label, when you compare it with your cabinet.

Will the FFBD1831US fit my opening?

Only your measurements can answer that. Enter the opening's height, width and depth in the lookup; the FFBD1831US comes back as a dimensional candidate, an installer-review item or outside the published requirements, and because this record is held for installer review it never appears as an automatic candidate. None of the three outcomes is a fit guarantee: mounting, utilities, floor level, trim, panel weight and door swing stay with the installer.

How tall is the FFBD1831US, and is that the opening height?

The manufacturer lists the FFBD1831US appliance body at 32 1/2 in high. The body height is not the opening requirement: the minimum opening height on record is 32 1/2 in and the maximum is 35 1/4 in. Measure from the finished floor to the counter underside at several points and use the smallest reading.

Why is the FFBD1831US held for installer review?

It carries a blocking review gate: Installer must verify finished opening, leveling range, insertion path, connections and door clearances; this research is not an installation guarantee. 03/26 spec p2 and installation p1 drawings visually reviewed. Both explicitly document32.5in cavity minimum. 32.5in ADA installation requires adjusting toe kick and leveling legs per sheet note. Manufacturer CA support explicitly links English US/Canada installation document; exact US model appears in sheet. Measurement conflict resolved 2026-09-21. The 03/26 diagram separates the cabinet opening (32 1/2 in min, 35 1/4 in max, 24 in min depth, 17 5/8 in min to 18 in max width) from the appliance (17 5/8 in wide, adjustable 32 1/2 in to 34 7/8 in high). The 24 in figure in the Dimensions and Volume table is a nominal planning depth; the drawings show a 22 1/2 in to 23 in body. Exact-model Abt listing verified 2026-09-21; the earlier merchant gap for this model is closed. Commission eligibility still depends on the advertiser terms. The gate stays visible on this page until the evidence resolves.