Fisher & Paykel DD24STX6I1 cabinet opening requirements

Questions people ask about the DD24STX6I1

The answers come only from the manufacturer documents linked on this page and the lookup's three outcomes.

What cabinet opening does the Fisher & Paykel DD24STX6I1 need?

No cabinet-opening requirement is verified for the Fisher & Paykel DD24STX6I1 in our records. The opening fields stay marked “Not verified”; they are never filled from body dimensions or from a manual that may not apply to this model. This record is held for installer review, so the lookup never returns it as an automatic candidate.

Is the DD24STX6I1 a standard 24-inch dishwasher?

Fisher & Paykel places the DD24STX6I1 in the 24-inch category. That label describes the cabinet class, not the cutout: the reviewed minimum opening width is not verified in our records, and the appliance body is 23 9/16 in wide. Use the opening requirement, never the label, when you compare it with your cabinet.

Will the DD24STX6I1 fit my opening?

Only your measurements can answer that. Enter the opening's height, width and depth in the lookup; the DD24STX6I1 comes back as a dimensional candidate, an installer-review item or outside the published requirements, and because this record is held for installer review it never appears as an automatic candidate. None of the three outcomes is a fit guarantee: mounting, utilities, floor level, trim, panel weight and door swing stay with the installer.

How tall is the DD24STX6I1, and is that the opening height?

The manufacturer lists the DD24STX6I1 appliance body at 17 7/8 in high. The body height is not the opening requirement: no minimum opening height is verified in our records. Measure from the finished floor to the counter underside at several points and use the smallest reading.

Why is the DD24STX6I1 held for installer review?

It carries a blocking review gate: Candidate requires installer review of site conditions, utilities, panel or drawer clearance; do not enable automatic fit from this research batch. Planning guide page 15 gives an 18 x 23 5/8 x 22 3/4-inch cavity conditional on 3/4-inch panel and ventilation layout. Guide says not to use as installation guidance; main opening fields remain null. The gate stays visible on this page until the evidence resolves.

Does the DD24STX6I1 have a smaller published cutout?

Yes. The published drawing also shows a height from 18 in, a depth from 22 3/4 in. Planning-only conditional cavity; not an automatic fit. Panel and venting design must be checked against installation instructions. The lookup screens on the stricter published value; the smaller configuration stays an installer-review result, never an automatic match.