Bosch SPX68B55UC cabinet opening requirements

Questions people ask about the SPX68B55UC

The answers come only from the manufacturer documents linked on this page and the lookup's three outcomes.

What cabinet opening does the Bosch SPX68B55UC need?

The reviewed manufacturer document lists a minimum cabinet opening of 32 1/8 in high, 17 3/4 in wide and 24 in deep for the Bosch SPX68B55UC. Each figure links to its source in the table on this page. Its sources were reviewed on 2026-09-14.

Is the SPX68B55UC a standard 18-inch dishwasher?

Bosch places the SPX68B55UC in the 18-inch category. That label describes the cabinet class, not the cutout: the reviewed minimum opening width is 17 3/4 in, and the appliance body is 17 5/8 in wide. Use the opening requirement, never the label, when you compare it with your cabinet.

Will the SPX68B55UC fit my opening?

Only your measurements can answer that. Enter the opening's height, width and depth in the lookup; the SPX68B55UC comes back as a dimensional candidate, an installer-review item or outside the published requirements. None of the three outcomes is a fit guarantee: mounting, utilities, floor level, trim, panel weight and door swing stay with the installer.

How tall is the SPX68B55UC, and is that the opening height?

The manufacturer lists the SPX68B55UC appliance body at 32 1/16 in high. The body height is not the opening requirement: the minimum opening height on record is 32 1/8 in. Measure from the finished floor to the counter underside at several points and use the smallest reading.

Why is the SPX68B55UC held for installer review?

It carries installation notes from the review. The model-specific spec sheet requires a 32 1/8 × 17 3/4 × 24-inch opening and shows an upper cavity width of 18 inches. The product page lists 22-inch cutout depth. The stricter 24-inch spec drawing governs the screen; smaller depths need installer review. The 34 7/16-inch maximum is labeled on the appliance body, not the cavity. Maximum opening height and front/corner clearances remain unknown. Manufacturer availability was out of stock at the last observation, so this model remains in the review group until current availability is confirmed. The gate stays visible on this page until the evidence resolves.