Bosch SPV68C73UC cabinet opening requirements

Questions people ask about the SPV68C73UC

The answers come only from the manufacturer documents linked on this page and the lookup's three outcomes.

What cabinet opening does the Bosch SPV68C73UC need?

The reviewed manufacturer document lists a minimum cabinet opening of 32 1/8 in high, 17 3/4 in wide and 22 7/16 in deep for the Bosch SPV68C73UC. Each figure links to its source in the table on this page. This record is held for installer review, so the lookup never returns it as an automatic candidate.

Is the SPV68C73UC a standard 18-inch dishwasher?

Bosch places the SPV68C73UC in the 18-inch category. That label describes the cabinet class, not the cutout: the reviewed minimum opening width is 17 3/4 in, and the appliance body is 17 5/8 in wide. Use the opening requirement, never the label, when you compare it with your cabinet.

Will the SPV68C73UC fit my opening?

Only your measurements can answer that. Enter the opening's height, width and depth in the lookup; the SPV68C73UC comes back as a dimensional candidate, an installer-review item or outside the published requirements, and because this record is held for installer review it never appears as an automatic candidate. None of the three outcomes is a fit guarantee: mounting, utilities, floor level, trim, panel weight and door swing stay with the installer.

How tall is the SPV68C73UC, and is that the opening height?

The manufacturer lists the SPV68C73UC appliance body at 32 1/16 in high. The body height is not the opening requirement: the minimum opening height on record is 32 1/8 in. Measure from the finished floor to the counter underside at several points and use the smallest reading.

Why is the SPV68C73UC held for installer review?

It carries a blocking review gate: Installer must verify finished opening, leveling range, insertion path, connections and door clearances; this research is not an installation guarantee. Exact model named on9/26 specification; p2 drawing visually reviewed. Opening height is32 1/8in, not32 1/16in appliance height. Maximum cabinet-opening height is not inferred from maximum appliance height. Custom panel is required; panel height, thickness, weight and swing must be reviewed against drawing. Opening depth resolved 2026-09-21: page 1 states Required cutout size 32 1/8 in x 17 3/4 in x 22 7/16 in. Installer must still confirm the finished opening against the installation instructions. The gate stays visible on this page until the evidence resolves.