Bosch SGE53X55UC cabinet opening requirements

Questions people ask about the SGE53X55UC

The answers come only from the manufacturer documents linked on this page and the lookup's three outcomes.

What cabinet opening does the Bosch SGE53X55UC need?

The reviewed manufacturer document lists a minimum cabinet opening of 32 1/8 in high, 24 in wide and 24 in deep for the Bosch SGE53X55UC. Each figure links to its source in the table on this page. Treat any match as a dimensional candidate for an installer to confirm.

Is the SGE53X55UC a standard 24-inch dishwasher?

Bosch places the SGE53X55UC in the 24-inch category. That label describes the cabinet class, not the cutout: the reviewed minimum opening width is 24 in, and the appliance body is 23 9/16 in wide. Use the opening requirement, never the label, when you compare it with your cabinet.

Will the SGE53X55UC fit my opening?

Only your measurements can answer that. Enter the opening's height, width and depth in the lookup; the SGE53X55UC comes back as a dimensional candidate, an installer-review item or outside the published requirements. None of the three outcomes is a fit guarantee: mounting, utilities, floor level, trim, panel weight and door swing stay with the installer.

How tall is the SGE53X55UC, and is that the opening height?

The manufacturer lists the SGE53X55UC appliance body at 32 1/16 in high. The body height is not the opening requirement: the minimum opening height on record is 32 1/8 in. Measure from the finished floor to the counter underside at several points and use the smallest reading.